-
-
Search
-
Contact us
-
Log in
Your supplier directory
You'll find all the pre-treatment items we've listed and what requirements you need to follow on this page. If you need pre-treatment for your trade wastewater (sewage), you must remember to use only pre-treatment we've listed, size the pre-treatment to meet your maximum hourly flow and use a licensed plumber to install it.
Oil water separators
To meet our requirements, you must:
- ensure the oil water separator is the right size for your business needs
- use the appropriate pump type
- arrange for a licensed plumber to install the grease trap
- use only lids or covers specified by the manufacturer for the installation
- ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards and our requirements
- ensure adequate clearance above the grease trap (at least equal to the deepest part of the greasetrap) to allow for safe, easy access to clean and inspect it
- ensure stands, walkways and steps meet Australian Standards and Workplace Health and safety guidelines.
The following table lists oil water separators that meet our requirements for treating trade wastewater.
Oil water separators that meet our requirements
| Manufacturer | Item | Pump |
|---|---|---|
| Aline Pumps 1800 018 999 |
KWIKFLO KCPS-1000 (1,000 L/h) KWIKFLO KCPS-1500 (1,500 L/h) |
KDS 25-100 |
| Baldwin Industrial Systems Pty Ltd 02 9545 2811 |
CPS MPAK-MPM-12 (1,000 L/h) CPS MPAK-BMM-64/2/12 (2,000 L/h) CPS MPSK-BMM-64/3/12 (3,000 L/h) CPS VPAK-MPV-12 (1,000 L/h) CPS VPAK-BMV-64/2/12 (2,000 L/h) CPS VPAK-BMV-64/4/12 (3,000 L/h) |
DS25 DS32 DS38 DS25 DS32 DS38 |
| MakWater 1300 669 032 |
CB 1.0 SS – P vert tube pack (700 L/h) CL 1.5 SS – P vert tube pack (700 L/h) CL 3.0 SS – P vert tube pack (1,600 L/h) CL 1.5 SS – D vert tube pack (1,140 L/h) |
CP11 RJ – mono CP11 RJ – mono CP25 RJ – mono CM 1000 – nitrile diaphragm |
| Eclipse Environmental 1300 272 650 |
Eclipse Hydroflow 1000S – fibreglass plates (1,000 L/h) 3000S – fibreglass plates (3,000 L/h) 5000S – fibreglass plates (5,000 L/h) |
DP25 DP40 DP50 |
| Enviro Concepts (Aust.) 07 5535 9000 |
Oil water separator ISS VGS VF 15POF SIOS25 |
Diaphragm ASM DS25 |
| Everything Water Australia 07 3889 8546 |
Oil water separator DV1500NG, DV3000NG | DV1500NG use CP25 and DS25 DV3000NG use CP800 and DS/DT38 |
| K.S. Fibreglass Pty Ltd 0455 317 354 |
PTW OS15 – fibreglass plates (1,500 L/h) PTY OS30 – fibreglass plates (3,000 L/h) |
Kwikflo K/SM25 Kwikflo K/SM32 |
| Industrial Separation Systems (ISS) 02 9524 6654 |
VGS V10P0F(1,000 L/h) VGS V15P0F (1,500 L/h) VGS V15P3F (1,500 L/h) VGS V15P3A (1,500 L/h) VGS V20P3A (2,000 L/h) VGS V30P3A (3,000 L/h) VGS V30SOF (3,000 L/h) |
ASM DS/DT25 ASM DS/DT25 ASM DS/DT25 ASM DS/DT25 ASM DS32 ASM DS38 ASM DS38 |
| Industrial Separation Systems (ISS) 02 9524 6654 |
VGS V10POFP (700 L/h) VGS V15P3FP (1,600 L/h) |
CP11 RJ – mono CP25 RJ – mono |
| Mascot Engineering 1300 885 295 |
Mascot CFI 15 (1,500 L/h) Mascot CFI 30 (3,000 L/h) |
ASM DS25 ASM DS32 |
| Mike Miles Trade Waste 02 9672 4858 |
Marlin OS 15 (1,500 L/h) Marlin OS 30 (3,000 L/h) |
ASM DS25 ASM DS32 |
| SEPA Pty Ltd 02 9542 2434 |
Sepa – SS 1500, ss plates (1,380 L/h) Sepa – SS 3000, ss plates (2,580 L/h) Sepa – SS 5000, ss plates (4,200 L/h) |
DS or DT 25 DS or DT 32 DS or DT 38 |
| Ultraspin Technology Pty Ltd 03 9872 5466 |
Ultraspin oil/water separator OS 20 (1,500 L/h) OS 35 ( 3,500 L/h) |
Air operated diaphragm ARO 666-120-322-C ARO 666-170-322-C |
| Fox Environmental Pty Ltd 07 5437 8455 |
Separator system for light liquids FX1000SS (1,000 L/h) FX1000SSD (1,000 L/h) FX1500SS (1,500 L/h) FX1500SSD (1,500 L/h) FX3000SS (3,000 L/h) FX3000SSD (3,000 L/h) FX6000SSD (6,000 L/h) FX10000SS (10,000 L/hr) – conditional for car washing only |
Fox diaphragm pump ASM diaphragm pump |
| CleanaWater 1800 353 788 |
TS series 1,000 L/h 1,500 L/h 2,000 L/h 3,000 L/h 4,000 L/h |
Diaphragm pump |
Oil water separators that meet our requirements
Close table
Bucket traps – in-sink
The following table lists in-sink bucket traps that meet our requirements for treating trade wastewater.
In-sink bucket traps that meet our requirements
| Manufacturer | Supplier's item |
|---|---|
| Everbright 0416 239 986 |
SA-001 SA-002 (stainless steel) |
| Ecoguardians 1300 55 66 28 0419 531 335 |
S450 SL340 S1100 SL850 |
| 3Monkeez 02 9627 6111 |
Sink model SSBW Sink model SSBW_1 (stainless steel) |
| Stainless Metal Craft (Aust.) Pty Ltd 02 4735 5666 |
WSCK-1 ISW-50 |
| Vinidex Pty Ltd 13 11 69 |
93026 93027 93030 93031 |
In-sink bucket traps that meet our requirements
Close table
Bucket traps – in-floor
The following table lists in-floor bucket traps that meet our requirements for treating trade wastewater.
In-floor bucket traps that meet our requirements
| Manufacturer | Supplier's item |
|---|---|
| ACO Polycrete 02 4747 4000 |
ACO Wexel models 141876, 141877, 141878, 141879, 141880, 141881, 141882 must be fitted with a removable strainer and fixed secondary strainer from the following list:
|
| ACO Polycrete 02 4747 4000 |
ACO Gully models 142039, 142040, 142041, 142042, 141976, 141977, 141978, 141979, 141988, 141989, 141990, 141991, 141980, 141981, 141982, 141983, 141984, 141985, 141986, 141987 must be fitted with a removable strainer and a fixed secondary strainer from the following list:
|
| ACO Polycrete 02 4747 4000 |
ACO Wexel model
|
| ACO Polycrete 02 4747 4000 |
ACO Gully models 142043, 142044, 142045, 142046, 142047, 142048, 142049, 142050, 141922, 141993, 141994, 141995, 141996, 141997, 141988, 141999 must be fitted with a removable strainer and a fixed secondary strainer from the following list:
|
| Blucher (Australia) Pty Ltd 08 8734 3426 |
780.200.000.03s 780.200.000.05s 780.300.000.03s 780.300.000.05s (stainless steel) |
| Ecoguardians 1300 556 628 0419 531 335 |
F660 F1600 FT660 FT1600 |
| Galvin Engineering 02 9681 1366 |
Bucket floor trap combo 100PVC/HDPE Deep Body DB4D08S |
| KSH Shopfitting Equipment Pty Ltd 02 9642 3688 02 8064 1522 02 9642 3788 |
Round floor waste arrestor RW100 Square floor waste arrestor SW150 Vinyl floor waste arrestor SWV100 |
| Larkin & Shoushani Solution Pty Ltd 0408 792 779 0418 659 511 |
Grate seal bucket trap (flexible polyurethane canister with glass fibre reinforced nylon basket) |
| Mascot Engineering Group 02 9644 1044 |
SBA-1A SBA-2A (GRC) |
| MM Kembla 1800 804 631 |
KemDrain stainless X97800 X97801 X97802 X97803 X97804 X97805 Grated floor gully drains |
| OzFlow 07 3273 6847 |
Standard square top floor drains (and associated accessories): A-DRS-100-E-S A-DRS-150-E-S Standard round top floor drains (and associated accessories): A-DRS-100-RD-S A-DRS-150-RD-S Large floor drains (and associated accessories): A-75-400-150-E-S A-75-600-200-E-S Inspection points: A-REV-100-RD-S A-REV-150-RD-S Channels with grates and covers (and associated outlet sizes): A-SRD-70 A-GKR-150 A-GKR-200 A-GKR-250 A-GKR-300 A-GKR-400 A-GKR-500 Associated floor drain accessories: A-SF-218-4 A-SF-218-2 A-GVS-110 A-SFD-218-4 A-SFD-218-2 A-SBS-110-4 A-SBS-110-2 A-SF-283-4 A-SF-283-2 A-GVS-160 A-SFD-283-4 A-SFD-283-2 A-SBS-160-4 A-SBS-160-2 A-SFD-400-4 A-SFD-400-2 A-SFD-600-4 A-SFD-600-2 A-GVS-200 A-SBS-200-4 A-SBS-200-2 |
| Speciality Plumbing Supplies 02 9416 8031 |
BA100SS R150SR-BT Q150SR-BT Q200SR-BT V100SSA-BT R150SA R150SSA R150SA2 R225SA R225SSA R225SA2 Q150SA Q150SSA Q150SA2 Q200SA Q200SSA Q200SA2 LG100A-S LG100A-SSA LG100A2-S LG100A2-SS R225SA3 R22SSA3 Q200-150SA Q200-150SSA Q225ABA Q225SA Q225SSA Q300DA Q300NA Q300SA Q300SSA LG150A-N LG150A-S LF150A-SS LG150-SSA Q150SR-BTM Stainless steel, bronze, aluminium, nickel-bronze, chrome-plated bronze, grey cast iron, ductile iron SPS 150 mm square push-in bucket trap SPS 200 mm square push-in bucket trap |
| Stainless Metal Craft (Aust.) Pty Ltd 02 4735 5666 |
AT-1-round top AT-1-100S-round top AT-2-round top AT-5-round top AT-6-square top AT-6-XHD-square top AT-7-square top AT-8-square top AT-9-square top AT-1-HST-hinged top AT-2-HST-hinged top FFW-1-square top flushing floor waste CKT-125-square bar or heel guard grated floor drain CKT-150-square bar or heel guard grated floor drain CKT-200-square bar or heel guard grated floor drain CKT-S-width as required – square bar or heel guard grated floor drain Stainless steel in bucket traps / floor drains Waste outlet with removable secondary strainer / silt basket Fixed tertiary strainer, rubber ring seal fitted for PVC or HDPE connection VCR for vinyl floor as required |
| 3Monkeez 02 9627 6111 |
Vinyl floor waste (code FW-100VR) copper alloy floor waste outlet with 2 rubber ring seals fitted on the outlet connection
In-floor bucket trap (code FW-150BR) stainless steel floor waste outlet with removable strainer basket and fixed secondary strainer and 2 rubber ring seals fitted on the outlet connection
|
In-floor bucket traps that meet our requirements
Close table